
Prove cleanliness with the i-know kit
By implementing a monitoring tool, cleaning personnel will perform more consistently because they know cleanliness will be measured regularly.
Make the invisible visible
The i-know kit makes the invisible visible by scientifically proving how effective and thorough the i-range products clean. Using the ATP tests from the kit, you can quickly check if surfaces have been cleaned thoroughly.
Do you want to check the glossiness of the floor? With the glossmeter from the kit, you can easily do that. On top of that, it creates a high reflective gloss level so you need less light energy to create the same light experience.
Overall, the collected data helps you get more insights in the cleaning process in a more sustainable way, making future cleaning operations greener and more efficient.
Why i-know?
The i-know kit makes the invisible visible by scientifically proving how effective and thorough the products clean. The collected data helps you get more insights in the cleaning process, making future cleaning operations more efficient.
With our i-know kit you can start monitoring cleanliness. The glossmeter is an indicator of appearance and cleanliness. Use the ATP tests from the kit to quickly check if surfaces have been cleaned thoroughly.
The dirt challenge helps you prove how little water the i-mop uses and how much dirt it recovers out of the grouts and floor compared to competitive machines.
Unsafe slippery floors are often a result of floors being cleaned. Slips are a big cause of major injuries and can cost far more than you think. The slip alert can help you to prevent slip accidents and serious injuries.
With ATP tests, slip meters and dirt challenges, we collect data to get objective feedback about the quality of the cleaning results. Making future cleaning operations more efficient and cleaner.
i-know |
ATP Meter |
---|
Carry weight |
Size body (l x w x h) |
Operating temp. range |
Relative humidity range |
Measurement range |
Measurement time (ATP meter) |
Result memory size |
Batteries size |
Charger type |
Battery spec |
Gloss Meter |
Carry weight (Gloss Meter) |
Size body (l x w x h) Gloss Meter |
Operation temperature |
Humidity |
Measuring time |
Measurement angle |
Measuring area |
i-alert |
Weight slip alert |
Size body (l x w x h) i-alert |
Size ramp |
![]() Monitoring kit that scientifically measures cleanliness levels |
||
ATP Meter | ||
---|---|---|
Carry weight | 260 grams | |
Size body (l x w x h) | 72mm x 191mm x 32mm | |
Operating temp. range | 5 ~ 40˚C | |
Relative humidity range | 20 ~ 85%, non condensing | |
Measurement range | 0 to 9999 RLUs | |
Measurement time (ATP meter) | 15 sec | |
Result memory size | 500 tests | |
Batteries size | AA LR6 or E91 | |
Charger type | Off-board | |
Battery spec | min. 6 months (standby mode at 20˚C) min. / 500 test (continuous reading) | |
Gloss Meter | ||
Carry weight (Gloss Meter) | approx 350 grams | |
Size body (l x w x h) Gloss Meter | 160mm x 75mm x 90mm | |
Operation temperature | 0~40˚C | |
Humidity | <85% relative humidity | |
Measuring time | 0,5s | |
Measurement angle | 20˚/ 60˚/ 85˚/ | |
Measuring area | ||
i-alert | ||
Weight slip alert | 5 kg | |
Size body (l x w x h) i-alert | 250 x 180 x 70mm | |
Size ramp | 900 x 190 and 250 mm |